Project overview
The design targets up to twenty conveyor modules. Each module has its own local controller and industrial gateway. Node-RED identifies reachable modules and presents an overview of their connection status.
Siemens LOGO! 8.3 · Node-RED · Industrial gateway
A modular engineering prototype for conveyor control and automatic recognition of connected conveyor modules.
The design targets up to twenty conveyor modules. Each module has its own local controller and industrial gateway. Node-RED identifies reachable modules and presents an overview of their connection status.
Siemens LOGO! 8.3 provides local machine control. An industrial gateway runs Node-RED for communication and monitoring. Ethernet networking connects the modules. The connection between LOGO! and Node-RED is under development.
Prototype validated with two modules. Reading actual LOGO! variables, long-term communication stability, integration of machine outputs and operation with twenty modules have not yet been confirmed.
Local emergency stops, protective devices and interlocks remain independent of Node-RED and the network. Network discovery is for status and supervision, not machine safety. The prototype is not released for production operation.
allroundservicemb@gmail.com
Public project summary — no customer names, internal network addresses or private configurations.
Siemens LOGO! 8.3 · Node-RED · Industriële router
Een modulair engineeringprototype voor transportbandbesturing en automatische herkenning van aangesloten bandmodules.
Het ontwerp is bedoeld voor maximaal twintig transportbandmodules. Elke module heeft een eigen lokale besturing en industriële gateway. Node-RED herkent bereikbare modules en toont een overzicht van hun verbindingsstatus.
Siemens LOGO! 8.3 verzorgt de lokale machinebesturing. Een industriële gateway draait Node-RED voor communicatie en bewaking. De modules zijn verbonden via Ethernet. De koppeling tussen LOGO! en Node-RED wordt nog verder uitgewerkt.
Prototype getest met twee modules. Het correct uitlezen van LOGO!-variabelen, langdurige stabiliteit, koppeling met machine-uitgangen en werking met twintig modules zijn nog niet bevestigd.
Lokale noodstoppen, beveiligingen en vergrendelingen blijven onafhankelijk van Node-RED en het netwerk. Netwerkherkenning dient voor status en bewaking, niet voor machineveiligheid. Het prototype is niet vrijgegeven voor productiebedrijf.
allroundservicemb@gmail.com
Openbare projectbeschrijving — zonder klantnamen, interne netwerkadressen of privéconfiguraties.
Siemens LOGO! 8.3 · Node-RED · Industrie-Gateway
Ein modulares Entwicklungsprojekt zur Förderbandsteuerung und automatischen Erkennung angeschlossener Module.
Das Konzept ist für bis zu zwanzig Förderbandmodule ausgelegt. Jedes Modul besitzt eine eigene lokale Steuerung und ein Industrie-Gateway. Node-RED erkennt erreichbare Module und zeigt deren Verbindungsstatus an.
Siemens LOGO! 8.3 übernimmt die lokale Maschinensteuerung. Ein Industrie-Gateway betreibt Node-RED für Kommunikation und Überwachung. Die Module sind über Ethernet verbunden. Die LOGO!-Anbindung an Node-RED wird noch weiterentwickelt.
Der Prototyp wurde mit zwei Modulen getestet. Das Auslesen von LOGO!-Variablen, die Langzeitstabilität, die Anbindung von Maschinenausgängen und der Betrieb mit zwanzig Modulen sind noch nicht bestätigt.
Lokale Not-Halt-Funktionen, Schutzeinrichtungen und Verriegelungen bleiben unabhängig von Node-RED und dem Netzwerk. Die Netzwerkerkennung dient der Überwachung, nicht der Maschinensicherheit. Der Prototyp ist nicht für den Produktionsbetrieb freigegeben.
allroundservicemb@gmail.com
Öffentliche Projektübersicht — ohne Kundennamen, interne Netzwerkadressen oder private Konfigurationen.
Siemens LOGO! 8.3 · Node-RED · Gateway industriale
Un prototipo modulare per il controllo dei nastri trasportatori e il riconoscimento automatico dei moduli collegati.
Il progetto prevede fino a venti moduli di trasporto. Ogni modulo dispone di un controllore locale e di un gateway industriale. Node-RED rileva i moduli raggiungibili e ne mostra lo stato di connessione.
Siemens LOGO! 8.3 gestisce il controllo locale della macchina. Un gateway industriale esegue Node-RED per comunicazione e monitoraggio. I moduli sono collegati tramite Ethernet. L’integrazione fra LOGO! e Node-RED è ancora in fase di sviluppo.
Prototipo testato con due moduli. Non sono ancora confermati la lettura delle variabili LOGO!, la stabilità a lungo termine, l’integrazione delle uscite macchina e il funzionamento con venti moduli.
Arresti di emergenza locali, protezioni e interblocchi rimangono indipendenti da Node-RED e dalla rete. Il rilevamento di rete serve al monitoraggio, non alla sicurezza della macchina. Il prototipo non è approvato per la produzione.
allroundservicemb@gmail.com
Descrizione pubblica — senza nomi dei clienti, indirizzi di rete interni o configurazioni private.